What to Look for in a Motorcycle Helmet

What to look for in a motorcycle helmet? When motorsport, especially when riding a motorcycle should always be worn a helmet to protect the head in case of accidents from serious and dangerous head injuries.

Meanwhile, the motorcycle helmet is not only mere protection, but you can also put fashionable statements with him.

Motorcycle helmets are available in a variety of designs and price ranges, and many cheap motorcycle helmets are on the market.

For a motorcycle helmet to fulfill its task of protecting life properly, it has to fit. Here are some tips for you on what to look for when buying the ideal motorcycle helmet for you.

If you need a new motorcycle helmet, you should bring a lot of time to buy. You can not buy a new helmet in passing: it has to fit, you have to feel comfortable in it and it must not interfere with motorcycling.

If you have enough time to buy a helmet, you can get detailed advice, try on a variety of helmets and, if you’re on a test drive, give it your helmet.

At the store, you should wear the helmet you want to buy for at least ten minutes. This will allow you to check if there are bruises or skin intolerances within this time.

What to look for in a motorcycle helmet

Tips for Choosing a Helmet for Rider with Glasses, Make Sure It Has This Feature

Many riders with glasses, are lazy to choose a full-face helmet because they are less comfortable to wear. Especially if you use thick eyeglass frames, certainly make your head hurt because of pressure.

Fortunately, this complaint was heard by helmet manufacturers and began to provide helmets that are comfortable for bespectacled riders.

A typical problem with glasses with riders, we have to take off our glasses before wearing a full-face helmet. Called modular, because the model is like a full face with the jaw part can be opened until it becomes a half face.

This helmet is suitable for rider goggles because access is wearing glasses that are quite wide without having to pass the visor.

Motorcycle Helmet – how can I determine the size?

Determine the correct helmet size by measuring the head circumference in the forehead area, over the ears and at the back of the head.

The head circumference in centimeters usually corresponds to the numerical helmet size. However, the helmets of different manufacturers are also different in size.

How should the helmet sit?

The ideal motorcycle helmet must sit firmly on the whole head and must not push. You can find out if the helmet fits perfectly if you move the helmet.

Moves the scalp on the forehead when turning the motorcycle helmet with, the helmet sits well. It is important not to choose the helmet too large because the inner padding gives in when wearing something.

The padding should also rest on the top of the head in the area of ​​the vertex.

In addition, the helmet must not be deducted from the head with a closed and correctly adjusted chinstrap. Make sure that the chin straps are not allowed to rest on the larynx.

The chin strap lock must not press on the lower jaw. Many manufacturers and dealers offer customized helmets for motorcycle helmets.

Especially the pads on the head and the cheek pads can be adjusted individually. In addition, the interior should be removed for better care.

What else should be considered?

Important for a motorcycle helmet is that even with the visor closed the air exchange is sufficient. If you prefer a tinted visor on sunny days, then the visors should be replaced with a few simple steps.

Wearers of glasses should make sure that they can wear the glasses they use under the helmet, this also applies to sunglasses.

Motorcycle helmet norm

When buying a motorcycle helmet, make sure that it complies with the current ECE R 22/05 standard. Helmets that are not approved in accordance with this standard no longer provide the required safety, so that they can lead to serious head injuries despite their wearing.

At the same time, the protection of helmets that do not comply with this standard is at risk. The standard is attached to a small label, which is usually on the chin strap.

As solar radiation and UV rays affect the stability of the motorcycle helmet over time, the helmet should be replaced every five years, but at least every seven years.

This also applies after every accident or fall.

In addition: to adding certain functions to objects, accessories in the following helmets can also make the helmet look cooler. Among the accessories that can change the look of the helmet to be cool and widely used are Antifog, Pinlock and Tear Off.

The three accessories have different functions, rather than just curious about the reviews below:


Antifog is an object that looks like a visor that is smaller, has a flexible texture like rubber and has a clear color. Antifog is a helmet accessory that functions as anti-dew.

If you feel that the helmet you are using is always dewy when the weather is cold like when it rains, then by installing this antifog your helmet glass will be free from the name of dew.


What is Pinlock? Actually, Pinlock is antifog. I don’t know since when people called antifog becoming a Pinlock. But certainly, there are many misconceptions about Pinlock and antifog.

The actual Pinlock is the brand name. So the correct mention is antifog, not Pinlock.

Tear Off

If the antifog is mounted on the surface of the glass, the tear-off is installed on the outer surface of the glass. Tear Off is a layer in the form of a thin plastic that serves to keep the visor from scratching.

The rough language is the same as scratch-resistant.